Calypso Cork DIY – So very easy to install.
Calypso Cork is extremely easy for the home handyperson to install. Particularly easy for ladies to install as products are light in weight, & only a Stanly knife is required for tile cutting.
All you need to do is follow the simple, easy to follow instruction sheets
Written in simple terms & with diagram images very self explanatory. You will find our instructions very easy but should you feel the need to ask a question whilst installing, our DIY team is always available for a chat to remedy your particular query.
Whether you choose standard size Calypso cork tiles or our Designer Cut tiles – it simply just fits.
Calypso Cork tiles are pre glued for easy installation.
The top of the coloured cork tile is pre coated with two coats of sealer applied to keep your tiles clean whilst installing.
After the installation is completed a final two coats of Non Toxic, Non Yellowing coating is applied over your Calypso coloured cork to seal the entire floor. This easy to apply coating waterproofs the floor & prevents any moisture or dirt lodging in between the joins. This simple & easy to use coating is supplied to you in the total package.
What you get:
- Calypso Cork tiles as ordered.
- Primer to seal concrete or surface to be covered.
- Latex adhesive to be spread over the primer prior to installation.
- Non Toxic, Non Yellowing Coating for final coats.
- Easy to follow Instructions & diagrams for installation.
What you need:
- Tape Measure
- Pencil
- Stanley Knife
- Brush & Roller for finishing coats.
 |
 |
 |
 |
 |
 |
 |
|
